Call 914.482.8429 for your plumbing services.

Sewer Heroes Pipe Lining
Sewer Heroes Pipe Lining
  • Home
  • Schedule Service
  • Pipe Lining
  • SpeedyLight UV LED Lining
  • Awards
  • Contact Us
  • More
    • Home
    • Schedule Service
    • Pipe Lining
    • SpeedyLight UV LED Lining
    • Awards
    • Contact Us

Call 914.482.8429 for your plumbing services.


  • Home
  • Schedule Service
  • Pipe Lining
  • SpeedyLight UV LED Lining
  • Awards
  • Contact Us

ADVANTAGES OF SEWER PIPE LINING

Because Sewer Heroes uses a ZERO DIG technology, excavation is not required to rehabilitate a cracked, damaged, or broken pipeline. Excavations may sometimes be necessary depending on the design of the sewer line. Our liners are often installed through a clean-out or other access points available and leave behind a smooth and joint-free pipe. Most sewer pipes can be repaired with the ZERO DIG technology, but special design considerations are taken into account to prevent wrinkling and stretching.  Our liners help prevent breakage and intrusions without the need of digging up property.

Find out more

Sewer Heroes Pipe Lining

Video inspecting the new cured in place pipe.

STEP 1

STEP 1

STEP 1

Video Inspect the Sewer Line

The sewer line is camera inspected to find the problem.

Cracked pipe and broken sewer line.

STEP 2

STEP 1

STEP 1

Clean Out Sewer Line

The sewer line is then cleaned of any roots, scales, or debris that may be obstructing the line. 

Sewer lining installation process.

STEP 3

STEP 1

STEP 3

Take All Necessary Measurements

All measurements are taken of the sewer line and the appropriate materials are then cut to acquired size.

Preparing for a sewer liner installation.

STEP 4

STEP 4

STEP 4

Prepare Resin

The epoxy resin is then measured and mixed to prepare for liner.

Wetting out a sewer lining sleeve with epoxy lining resin.

STEP 5

STEP 4

STEP 4

Pour Resin into Liner

The liner is saturated with the epoxy resin and rolled out to ensure total wetness.

Preparing the inversion drum for sewer lining repair process.

STEP 6

STEP 4

STEP 6

Load Inverter 

The inverter is then loaded with the saturated liner and calibration tube.

New cured in place pipe lining sleeve exiting the pvc pipe.

STEP 7

STEP 7

STEP 7

 Liner Enters Sewer Line

The end of liner is then inserted into existing sewer line to prepare for installation. 

Controlling air pressure for new sewer liner being installed.

STEP 8

STEP 7

STEP 7

Invert Liner

The inverter is introduced with air pressure to invert the liner into the existing sewer line and the calibration tube holds the liner in place as it cures. 

Cured in place pipe lining.

STEP 9

STEP 7

STEP 9

Sewer Line Repaired

Once the liner is cured in place, the calibration tube is removed and the pipe is video inspected once more to ensure successful installation. 

Copyright © 2017 Sewer Heroes Pipe Lining - All Rights Reserved.

Westchester, Bronx, Dutchess, Putnam, Rockland